technology

OVERMADE has completed the delivery of a DYNAFLOW FL Hydraulic headbox for the North American Market

With a pond width of 6200 mm and an operation output of approx. 750 tpd., the headbox is intended for the bottom layer of a machine producing high quality testliner and fluting up to 1200 tpd at a speed of 1100 mpm.

OVERMADE has completed the delivery of a DYNAFLOW FL Hydraulic headbox for the North American Market

The headbox design has been selected for the excellent distribution of the fiber it is able to grant, contributing to achieve the highest market standards of CD basis weight profile and paper properties.

The target of the installation is to improve the efficiency of the forming section when basis weights ranging from 100 gsm to 273 gsm are produced using up to 80% of mixed waste paper and only 20% of OCC.

The performances of the DYNAFLOW-FL headbox are the result of the latest innovations applied to the “DYNAFLO CONCEPT”, the exclusive turbulence generator developed in OVER’s pilot plant. The CD basis weight profile is controlled by means of a dilution system. The headbox features an additional edge flow control system, capable of locally adjusting the flow from 60% to 160% of its nominal value, designed to optimize the fiber orientation all across the paper width.

The headbox is supplied with stiff lamellas in the slice area to maintain a high level of micro-turbulence up to the jet exit, thus improving paper formation at high speeds.

DYNAFLOW-FL, the headbox for high speed Fourdrinier forming section, is available also in a multilayer layout. Multilayer headbox permits to use stocks of different characteristics or qualities to produce multilayer paper with a single forming section available.

papnews logo

Edipap Srl | VAT IT09057310964 | Via Pordenone 13, 20132 - Milan - Italy | phone +39 02 21711614 | www.edipap.com | info@papnews.com

close and go back to site

Lost your password?

close and go back to site