AZMEC is always looking for the discovering of a better and improved product

Azmec is projecting and producing machines that grant an excellent quality together with high performances even in very hard working conditions. It offers vacuum pumps of various dimensions to grant the customer a wide range of machines working at different levels of energy consumptions.

author: Azmec Srl

Industry Insight by:

Azmec S.r.l.

The skill and the experience consolidated in 60 years of presence in the market (AZMEC was founded in 1960) say that AZMEC is a serious and available partner for all the companies of the paper mill industry that have to optimize the performances of its own vacuum plant, a main part of the paper machine. AZMEC is not only proposing its own solutions in new vacuum plants but allows the customers, through its overhauling service, to rebuild old pumps working since many years, to the original performances with an accurate revamping operation.


A leader company in the market, having in pole position the satisfaction of the customer


AZMEC production includes six lines of vacuum pumps, machines available to grant capacities from 150 up to 50,000 m³/h. Together with the vacuum pumps, AZMEC offers to the customers all the available accessories, that’s to say the driving systems (pulleys and V-belts, gear reducers when the installed power is more than 355 Kw) the discharge separators, the silencers, the pre-separation groups, the safety valves, the self-priming extraction pumps and the dampers, just to mention the main parts. The vacuum pumps of the range AL/2000 cover a capacity interval from 150 to 12,500 m³/h; the range ALBV/2000 covers capacities from 2,000 to 7,500 m³/h and the characteristic of these pumps is to have practically two pumps in one due to the presence of a divider that creates two sections each one available to grant the 50% of the total capacity and different vacuum degrees. The same solution, but with horizontal suction nozzles, is granted from the pumps of the range ALZ/2000 that have the same range of capacities of the range AL/2000; with the size ALCZ, pumps available to work without and with the divider, the capacities reach the maximum of 50,000 m³/h; the range ALBC grants capacities from 450 up to 17,000 m³/h and the range ALB4 grants capacities from 4,500 up to 21,000 m³/h.


Vacuum pump group AL60 in AISI316L mechanical seal API681 execution.
Vaccum pump group ALN75 mechanical seal
+ plan ATEX

A special care is offered from AZMEC to one of the problems that is present more and more frequently: the reduction of the noise level of the machines according to the laws concerned to the ambient. To get the best solution, AZMEC offers to the customers the covering of the pumps with soundproof panels available to reduce the noise level to 75 dB(A); clearly these solutions can be applied also on machines already installed.

Vacuum pump group ALC500Z with partial recirculation system of the service liquid.

The AZMEC proposal is not concerned only to the supply of its own machines; AZMEC is offering to the customers a complete service for the best arrangement of the vacuum plant. Usually AZMEC is preparing a lay-out of the vacuum plant arranged according to space necessity and to customer installation just to optimize everything both from a technical view and a logistic view just not to have problems in case of maintenance. Just to go inside the maintenances, AZMEC overhauls not only its own machines but also the pumps of competitors. All the pumps are sent back with the due guarantee and with the test data available to confirm the right operating. To check the eventual necessity to arrange a maintenance, AZMEC can be present with its technicians near the customer workshop to do the measures of capacity, vacuum degree and absorbed power of the vacuum pumps present in the plant. Usually, AZMEC supply the customers with a spare pump so that the production has not to be stopped during the repairing of the pump.


We are always looking for the discovering of a better and improved product


It’s important to mention the last and very important supplies made recently from AZMEC:

  • A2A GENCOGAS n.1 turn key solution skid AL75/2000 with soundproof cabin (Chivasso Plant Italy);
  • FLSMIDTH MILANO n.3 vacuum skid AL40/2000 in AISI316 with soundproof cabin (final destination Spain);
  • GAPCON TISSUE n.5 ALC420Z pumps + n.1 ALC400Z (final destination Indonesia and Bolivia);
  • TECNIMONT SPA n.3 vacuum skid ALN64/2003 totally in AISI316 with double mechanical seals and API681 execution (final destination The Netherlands);
  • ATLANTUM n.12 vacuum groups ALC420Z (final destination Belarus);
  • ANDRITZ n.2 vacuum pumps ALC670Z and n.1 vacuum group ALC500Z (final destination Russia);
  • FLSMIDTH MILANO n.2 vacuum skid ALN68/2000 direct coupling with double mechanical seal ATEX execution (final destination Indonesia);
  • TECNIPLANT SPA n.1 vacuum skid ALC253Z with partial recirculation system of the service liquid + n.1 vacuum skid ALC500Z with partial recirculation system of the service liquid (final destination Germany).

The production is arranged in two workshops: Arenzano (GE) and Verderio (LC). The vacuum pumps are manufactured through the use of CNC tool machines and tested in the certified test room. AZMEC is working according to the rules ISO 9001 and its target is to offer a more and more complete service to the customers, depending on the consolidated quality of its own products and on the efficiency of its staff.


papnews logo

Edipap Srl | VAT IT09057310964 | Via Pordenone 13, 20132 - Milan - Italy | phone +39 02 21711614 | |